QUT offers a diverse range of student topics for Honours, Masters and PhD study. Search to find a topic that interests you or propose your own research topic to a prospective QUT supervisor. You may also ask a prospective supervisor to help you identify or refine a research topic.
Found 545 matching student topics
Displaying 529–540 of 545 results
Structural application of green concrete
The need for sustainable construction has prompted researching alternative concrete technologies around the world. In QUT, a project has been developed to investigate structural applications of environmentally friendly (Green) concrete.Project activities can be undertaken by students at various levels, including VRES, final-year undergraduates, and PhD researchers.
- Study level
- PhD, Honours
- Faculty
- Faculty of Engineering
- School
- School of Civil and Environmental Engineering
- Research centre(s)
- Centre for Materials Science
Centre for the Environment
Polymer particles as precision sensors for molecules
Polymer particles are a billion-dollar industry with a diverse range of applications from biomedical to industrial coatings. As a prime example, point-of-care testing devices rely on polymeric particles with various size and functionality to conveniently allow instantaneous, selective, and precise diagnostics. However, as new applications arise and current applications advance, these demand the preparation of increasingly complex material and particle systems.The Soft Matter Materials Team has developed a simple method to form uniform particles without any additives, initiators or stabilizers. …
- Study level
- PhD, Master of Philosophy, Honours
- Faculty
- Faculty of Science
- School
- School of Chemistry and Physics
- Research centre(s)
- Centre for Materials Science
Using light for 3D patterning of surfaces: the visible light challenge
Inspired by nature's way of using light to trigger chemical processes known as photosynthesis by green plants, the idea of using light as an energy source to make and break chemical bonds has been widely applied for the development of more complex structures in the soft matter materials design and biological sciences. However, to date, the energy required to activate chemical bond formation was mostly extracted from UV light which is a drawback to develop and apply these reaction systems …
- Study level
- PhD, Master of Philosophy, Honours
- Faculty
- Faculty of Science
- School
- School of Chemistry and Physics
- Research centre(s)
- Centre for Materials Science
Towards Synthetic protein-structures based on precision macromolecules: can we beat nature in designing catalysts?
Up for a challenge? In this project you can explore if you can beat nature in making catalytic systems! Over billions of years, nature has perfected the design and synthesis of high molecular weight precision macromolecules, which are able to execute a specific function in a complex biological environment such as proteins.
- Study level
- PhD, Master of Philosophy, Honours
- Faculty
- Faculty of Science
- School
- School of Chemistry and Physics
- Research centre(s)
- Centre for Materials Science
Macromolecular barcoding for tracing plastic materials for the circular economy: a game changer for recycling
The reduction and management of plastic waste is perhaps the most critical challenge facing modern economies and plastic pollution cannot be resolved by generic approaches to research or to problem-solving. The Soft Matter Materials Team aims to resolve the anonymity and ubiquity of plastics by pioneering a simple optical readout system that can identify the uniquely coded information in macromolecules that have been embedded in plastics.In this project, optically readable macromolecular barcodes based on a system of excimer fluorescence switch-on …
- Study level
- PhD, Master of Philosophy, Honours
- Faculty
- Faculty of Science
- School
- School of Chemistry and Physics
- Research centre(s)
- Centre for Materials Science
Advanced polymer inks for 3D printing - defining the future of 3D additive manufacturing
Some estimates state that 30% of all manufactured goods will be 3D printed in 2030. A particular type of 3D printing is 3D laser lithography with which micro- and nano-sized structures can be prepared. Such structures find wide ranging applications in meta-materials functioning as invisibility cloaks or scaffolds for single (stem) cell interrogation. Today’s inks for 3D printing, however, only allow one material property to be written with one laser wavelength.Working in close collaboration with team members of the Soft …
- Study level
- PhD, Master of Philosophy, Honours
- Faculty
- Faculty of Science
- School
- School of Chemistry and Physics
- Research centre(s)
- Centre for Materials Science
Modelling the response of expansive soil under wetting and drying
Expansive soils are those which can experience significant volume change when water content varies and as of this reason they are considered as problematic soils in geotechnical engineering. Expansive soils are widely distributed globally and cover a significant percentage of world land surface, especially in arid and semi-arid area.In Australia, expansive soil covers around 20% of surface soils and approximately 30% of the total ‘built-up’ land area is covered by expansive soils. This figure is expected to increase, as the …
- Study level
- Master of Philosophy, Honours
- Faculty
- Faculty of Engineering
- School
- School of Civil and Environmental Engineering
- Research centre(s)
- Centre for Materials Science
Investigating Australian consumer perspectives on smart home products
Technological advancements such as information and communication technologies, artificial intelligence, internet-of-things, robotics, and the increasing popularity of the smart city and smart living movements during the last couple of decades have created and intensified a boom of the smart home industry. At present, digital technology applications uptake in homes has become common and increasingly changed people’s lifestyles. Smart home technology provides a suite of independently and remotely controlled software and hardware connected to a network to deliver smart living. Smart …
- Study level
- PhD, Master of Philosophy, Honours
- Faculty
- Faculty of Engineering
- School
- School of Architecture and Built Environment
Value-adding waste materials
Many industries generate copious amounts of waste products.Of particular interest are those wastes generated by the mining sector as typically a large fraction of the ore bodies are dumped or the agricultural sector.Potential solutions we are investigating include:converting aluminosilicate waste to zeolitestransforming inorganic waste to catalyst materialscreation of materials for water and wastewater treatmentmaking activated carbonrenewable fuels,
- Study level
- PhD, Master of Philosophy, Honours
- Faculty
- Faculty of Engineering
- School
- School of Mechanical, Medical and Process Engineering
High performance energy storage materials and devices
Energy storage devices, such as supercapacitors, play an increasingly important role in our daily life as a reliable energy supplier. Supercapacitors are a type of energy storage system that possess merits of rapid energy storage and release (high power density) with a cycling lifetime of ten thousand or more. Nevertheless the energy density of conventional electrochemical capacitor is quite low.This project aims to enhance the energy density of supercapacitors without compromising their power density through innovative designing and synthesising electrode …
- Study level
- PhD, Master of Philosophy, Honours
- Faculty
- Faculty of Science
- School
- School of Chemistry and Physics
- Research centre(s)
- Centre for Materials Science
Centre for Clean Energy Technologies and Practices
Green polymer-inorganic composite materials
Composite materials are widely researched and widely used in applications such as aircraft, automobiles, ships, structural components and even the space industry.There is a need to create new composite materials which are environmentally friendly and do not use fossil fuel based products. Moreover, the properties of the composites need to be improved while at the same time minimising the costs involved.Consequently our research group is working on composite materials which not only include inexpensive inorganic fillers from the mining sector …
- Study level
- PhD, Master of Philosophy, Honours
- Faculty
- Faculty of Engineering
- School
- School of Mechanical, Medical and Process Engineering
Advanced materials for perovskite solar cells
Solar cells using metal halides perovskite materials to absorb light is one of the most important scientific discoveries. These cells have the potential to provide cost-effective solar electricity in the future. In the last decades, perovskite solar cells (PSCs) demonstrated unprecedented progress towards this goal. This technology holds the world record for energy conversion efficiency and is comparable to commercial crystalline silicon, but at a much lower cost.Currently their instability and use of hazardous solvents and toxic lead are key …
- Study level
- PhD, Master of Philosophy, Honours
- Faculty
- Faculty of Science
- School
- School of Chemistry and Physics
- Research centre(s)
- Centre for Materials Science
Contact us
If you have questions about the best options for you, the application process, your research topic, finding a supervisor or anything else, get in touch with us today.